Thame, Oxfordshire
Bungalow rear extension in Thame
For homes in Thame, a bungalow rear extension is often the simplest way to gain space without moving. Single-storey rear extensions that keep everything on one level. We take it from survey to completion certificate.
Thame sits in Oxfordshire, with postcode districts including OX9. For Thame bungalows we design the roof first, because the low eaves decide the height of the new room.
Book a free site visit
Tell us about the house and we'll call to arrange a free, no-obligation visit.
How much does a bungalow rear extension cost in Thame?
A bungalow rear extension in Thame is priced at £2,070–£3,360 per square metre including VAT as a guide, before kitchen fit-out and fees. South East prices run above our West Midlands baseline, mainly on labour rates and clay-soil foundations.
| Size | Guide price inc VAT |
|---|---|
| 3 m wide × 4 m deep (12 m²) | £25,000–£40,500 |
| 4 m wide × 6 m deep (24 m²) | £49,500–£80,500 |
Your written price follows a measured survey and an agreed design, so it reflects your house, not an average.
Do you need planning permission for a bungalow rear extension in Thame?
Planning for a bungalow rear extension in Thame follows the English householder rules.
Under England's householder permitted development rules you can usually add 3 metres at the back of an attached house, or 4 metres on a detached house, without a planning application, as long as the extension stays under 4 metres high and its eaves stay under 3 metres where it is within 2 metres of a boundary.
England also has the larger home extension route: a single-storey rear extension of up to 6 metres on an attached house or 8 metres on a detached house, after prior approval from the council. The council notifies your neighbours and has 42 days to decide; the fee is £249 (£310 for applications made from 8 December 2026). The route is not available on designated land such as conservation areas.
Conservation areas, National Parks, National Landscapes and the Broads restrict permitted development, and listed buildings always need listed building consent. We check your house's planning history and any conservation area before drawing, so the route is clear before you spend on plans.
What are homes in Thame like to extend?
Thame has a mix of Victorian terraces near the centre and larger Edwardian and inter-war houses further out. Clay soils across much of the South East mean deeper foundations near trees, which we plan for at the survey.
How a bungalow rear extension in Thame comes together
Survey visit
We visit free of charge, measure up, check access, drainage and neighbours' extensions, and note what you want the room to do.
Options and costs
We draw layout options and price each one, so the budget shapes the design rather than surprising you later.
Planning and regulations
We take the design through the right planning route, then produce the construction drawings and engineer's calculations for building control.
Build and sign-off
We build to the approved drawings with regular updates, then hand over the building control completion certificate and any guarantees from suppliers.
Bungalow rear extensions near Thame
From Thame, the nearest places we also cover are Aylesbury (8.4 miles) and Cowley (9.9 miles).
- Bungalow rear extension in Aylesbury
- Bungalow rear extension in Cowley
- Bungalow rear extension in Oxford
- Bungalow rear extension in Wallingford
- Bungalow rear extension in High Wycombe
Other work in Thame:
FAQ
Bungalow rear extension questions in Thame
Do I need planning permission for a rear extension in Thame?
Often not for a single-storey rear extension of up to 3 metres (4 metres on a detached house) under permitted development, or up to 6 or 8 metres with prior approval, unless the house is in a conservation area or its rights have been removed.
Do I need a party wall agreement?
In England, usually yes if the extension is on or near a shared boundary or the foundations are close to a neighbour's building. We serve the notices.
How deep can I extend?
The same limits as a house: 3 or 4 metres in England, more with prior approval.
What postcode areas do you cover around Thame?
Including OX9, and the surrounding Oxfordshire area.
How long does a rear extension take to build in Thame?
Most single-storey rear extensions take 10 to 16 weeks on site and two-storey extensions 16 to 26 weeks, after design and approvals.
Will I need a structural engineer?
Yes for the beam over the new opening and usually the foundations; we arrange them and their calculations go to building control.