Melksham, Wiltshire
Wraparound extension in Melksham
Wraparound extension in Melksham: an L-shaped extension that fills the side return and runs across the back. We measure the house, show you what the rules allow, price it in writing and build it.
We cover Melksham (SN12) as part of our Wiltshire work. Wraparound projects around Melksham often involve two neighbours, so we start the party wall conversations early.
Book a free site visit
Tell us about the house and we'll call to arrange a free, no-obligation visit.
How much does a wraparound extension cost in Melksham?
In Melksham, our guide for a wraparound extension is £2,290–£3,740 per square metre including VAT for a standard specification. South West prices run slightly above our West Midlands baseline; natural stone to match the house is the main variable.
| Size | Guide price inc VAT |
|---|---|
| L-shaped, about 22 m² of new floor | £50,500–£82,500 |
| L-shaped, about 30 m² of new floor | £68,500–£112,500 |
Ground conditions, glazing, the roof and how far the house is opened up move the final figure within the range.
Do you need planning permission for a wraparound extension in Melksham?
Here is how the rules in England apply to a wraparound extension in Melksham.
Side return infills and the side leg of a wraparound are treated as side extensions in England: single-storey, no more than 4 metres high and no wider than half the original house. They are not permitted development in conservation areas, National Parks or National Landscapes, and a joined wraparound often needs a planning application because the side and rear rules apply together.
The Party Wall etc. Act 1996 applies in England: you serve notice two months before work to a shared wall, and one month before digging foundations within 3 metres (or 6 metres for deeper foundations) of a neighbour's building. Neighbours can agree in writing; if they dissent, surveyors agree an award.
Conservation areas, National Parks, National Landscapes and the Broads restrict permitted development, and listed buildings always need listed building consent. We check your house's planning history and any conservation area before drawing, so the route is clear before you spend on plans.
What are homes in Melksham like to extend?
Stone-built and rendered houses are common around Melksham, so matching the walling is a design decision in its own right: natural stone, reconstituted stone or a render finish across old and new.
How a wraparound extension in Melksham comes together
Look round and measure
A free visit to see the back of the house, measure it, check the drains and boundaries and hear what you need.
Drawings and budget
Floor plans and elevations for the options, each with a guide price.
Paperwork handled
Planning, prior approval or permitted development, Building Regulations approval, structural design and party wall notices are all handled by us.
Fixed price and build
A written price for the agreed design, a start date and a named contact through the build, ending with the building control completion certificate.
Wraparound extensions near Melksham
Neighbouring places we cover include Neston (3.8 miles) and Corsham (4.7 miles).
- Wraparound extension in Neston
- Wraparound extension in Corsham
- Wraparound extension in Trowbridge
- Wraparound extension in Chippenham
- Wraparound extension in Devizes
Other work in Melksham:
FAQ
Wraparound extension questions in Melksham
Who will build my extension?
Vetted building teams working under contract to us. Your contract is with S&K Property Investments and Improvement Ltd for the design and the build.
Do I need a party wall agreement?
In England, usually yes if the extension is on or near a shared boundary or the foundations are close to a neighbour's building. We serve the notices.
What roof suits a wraparound?
A flat roof with a lantern, a standing-seam pitched roof or a glazed roof over the side leg. The choice usually follows the first-floor windows above.
Do I need planning permission for a rear extension in Melksham?
Often not for a single-storey rear extension of up to 3 metres (4 metres on a detached house) under permitted development, or up to 6 or 8 metres with prior approval, unless the house is in a conservation area or its rights have been removed.
Will I need a structural engineer?
Yes for the beam over the new opening and usually the foundations; we arrange them and their calculations go to building control.
How much does a wraparound extension cost in Melksham?
As a guide, £2,290–£3,740 per square metre including VAT for a standard specification. For example, L-shaped, about 22 m² of new floor: about £50,500–£82,500 at that rate. Your written price follows the survey.